Crude Oil To Diesel Oil Refinery Cracking Catalyst FCC catalyst
The main components of the catalyst are alumina and silicon dioxide, as well as a small amount of metal components. After heating, the oil will be decomposed into light oil by catalytic cracking of the catalyst. Compared with simple heating distillation, the catalyst can Assist to get more light oil, at the same time, the oil quality is improved, the color is better, and the sulfur content is lower.
Different oil apply to different oil
1). KSC-3 for crude oil, mixed waste oil, waste mineral oil, the produts shall be diesel oil and gasoline oil.
2). KSC-4 for waste engine oil, the produts shall be diesel oil, gasoline oil, less gas and residue oil.
3). KSC-5 for waste plastic oil, the produts shall be diesel oil and gasoline oil.
4). KSC-6 for wast tyre oil, the produts shall be diesel oil and less gasoline oil.
With the catalyst, the produts quality can imporved lot with less sulfur content, good color, less smell.
3. Chemical Data:
|Type||A, B||A, B||A, B||A, B|
|Application||Crude oil, mixed waste oil, waste mineral oil||Waste engine oil||Waste plastic oil||Waste Tyre oil|
|Products||Diesel oil, gasoline oil||Diesel oil, gasoline oil, less gas and residue oil||Diesel oil, gasoline oil||Diesel oil, less gasoline oil|
|Oil Color||Water color or light yellow color||Water color or light yellow color||Yellow color||Yellow color|
|Ability||Recycle 2-3 times, 1ton catalyst refinery 200-500 tons oil||Recycle 2-3 times, 1 ton catalyst refinery 400-800 tons oil||Recycle 2-3 times, 1 ton catalyst refinery 600-1000 tons oil||Recycle 2-3 times, 1 ton catalyst refinery 600 tons oil|
|Oil recycle rate||≥85%||≥85%||≥90%||≥80%|